The heat requirement of a space can be professionally calculated by the mechanical engineer of the project by considering many parameters (such as sheathing/insulation type, floor, spotlight, glass condition, floor-detached situation, etc.). We know that accessing this information can be very difficult. We can offer a ‘’generic calculation’’. Please visit ‘’ Heat Loss’’ on the footer area.

After determining your heat loss, then you can use the heat output tables ​​​​in our catalogs or websites to determine how many, which size of Hammam radiators or towel warmers you need.

The ‘’generic calculation’’ has been given to provide rough information about your heat requirement and does not impose any responsibility on our company. It should not be forgotten that the heat requirement of every area with the same square meter cannot be the same. As mentioned at the beginning of our article, each area has its own characteristics depending on its sheathing, geographical location, location of the relevant area in the building, and many other parameters such as glass type, and the heat requirement may be different based on these features. The ‘’generic calculation’’ we provided gives out a very rough solution based on square meters.

Heat outputs should be measured by accredited laboratories according to EN 442 standards and reported by the laboratory for each size and each model. The number of accredited laboratories in the world does not exceed roughly 15, accredited laboratories have their own unique identification numbers. Although there are many institutions that conduct heat capacity testing most of them are not accredited. The results of the tests carried out in non-accredited institutions can deviate at very serious rates compared to accredited institutions. Tests conducted before accreditation should not be considered valid. Our Hammam towel warmers and radiators are tested in accredited laboratories such as Politekniko (Italy), WSP (Germany). You can choose our products that will warm your home and your interior by trusting all our data.

As Hammam Radiator, our top priority is correct and ethical trade and value-added production. For this reason, our declared values are declared within the framework of CE standards. Our products are tested in accredited laboratories abroad (mainly Italy and Germany). In order to make a comparison with our products, which we have positioned very different from our competitors by using many technologies in line with our ability to manufacture for 26 years, we kindly request accredited laboratory test reports of equivalent products and make comparisons in this way. Heat capacities should be measured by accredited laboratories according to EN 442 standards and reported by the laboratory for each size and each model. The number of accredited laboratories in the world does not exceed roughly 15, accredited laboratories have their own unique identification numbers. Although there are many institutions that conduct heat capacity tests, they are not accredited. The results of the tests carried out in non-accredited institutions can deviate at very serious rates compared to accredited institutions. The accreditation dates of laboratories are also important. Tests conducted before accreditation should not be considered valid.